Ocean Optics SD1000 Fiber Optics Spectrometer w/ PX-1 Xenon Flash Lamp w/ Discs

Description

You are buying both pieces, the spectrometer and the xenon flash lamp.  Both are untested but guaranteed to work or your money back.  They were purchased from an industrial surplus auction.
Take a look at our other listings for fiber optic cables.
Free shipping to the continental USA!
PX-1 Pulsed Xenon Strobe Lamp
- Light Source portion of the spectrophotometer
The PX-1 Pulsed Xenon Strobe Lamp is a short-arc flashlamp optimized for UV measurements from ~ 225-700 nm. The lamp produces high-energy, short-duration pulses that make it useful for applications requiring transient sample-taking, or for optical measurements such as fluorescence or phosphorescence. Because it produces a pulsed signal, the PX-1 is less likely than other UV light sources to experience solarization problems that may occur <250 nm in many optical fiber assemblies.
The PX-1 Pulsed Xenon Strobe Lamp runs via an external TTL positive pulse. The spectrometer operating software allows the user to control both the light pulse and detector scan rates. In addition, the user can set the lamp pulse rate for continuous or intermittent strobe activity.
The PX-1 comes with a 12VDC power supply (a European power supply is also available) and 9-pin interface cable with D-type connectors. The PX-1 connects directly to Ocean Optics S1000 series spectrometers via the 9-pin interface cable, and connects to S2000 series spectrometers via the interface cable and a 9-pin to 15-pin adapter (the S2000 has a 15-pin connector).
The PX-1 lamp has an SMA 905 connector for easy coupling to Ocean Optics fiber optic spectrometers and accessories, including optical fibers, cuvette holders, and probes.
PX-1 Pulsed Xenon Strobe Lamp -- Specifications
Spectral range:
~ 225 nm-700 nm
Dimensions:
13.0 cm x 10.0 cm x 5.5 cm (LWH)
5.1" x 4.0" x 2.2" (LWH)
Power input:
12VDC 750 ma
7.2 watts or 9.4-13.5 volts
Trigger input:
external TTL positive pulse via 9-pin connector
Output:
0.5 joule per pulse maximum
5.4 watts average power
10 Hz pulse rate maximum
Pulse duration:
5.6 microseconds (at 1/3 height of pulse)
Lifetime:
10
7
pulses (estimated 275 hours continuous operation at 10 Hz pulse rate)
Aperture:
3 mm
Connector:
SMA 905