LiteLink (Liteway) CT/CR-8001, 1 CH TX/RX, FIber Optic Contact Closure, Pair,New

Description

LiteLink (Liteway) CT/CR-8001, 1 CH TX, FIber Optic Contact Closure Pair
Ships via UPS Ground
The
LiteLink
®
CT/CR-8001 system consists of the CT-8001 transmitter and CR-8001 receiver. Both units utilize digital encoding techniques to transmit and receive one contact closure over a single optical fiber conductor.
The CT-8001 may be activated by dry contacts or TTL signals and the CR-8001 will reproduce these inputs as isolated output contact closures corresponding to the respective input signal. All inputs are transient protected against excessive surges present on the signal and power leads. The unit is completely fail-safe in that a loss of operating power or a broken fiber will force all contacts to the open condition.
Number of Channels
One
·
Low Cost
Transmitter Input
Dry Contact Closure or TTL
·
Signal & Power & Link Indicators
Tx Input Impedance
3 K Ohms maximum
·
Multimode & Single-mode
versions
Receiver Output
Relay Contact Closure
·
Stand-alone, DIN or Rack
Mountable (same unit)
Output Contact switching A
0.5 A @ 125 VAC (62.5VA)
1.0 A @ 24 VDC
Output Contact Resistance
100 Milliohms maximum
Operating Wavelength
850, 1310 or 1550nm
Speed of Response
10 ms maximum
Operating Temperature
-35 to +75 °C
Optical Connectors
ST (multimode)
FCPC (single-mode)
Optical Loss Budget
0-10 dB (multimode),
0-12 dB (single-mode)
Humidity
<95% non-condensing
MTBF (per MIL HBK 217D)
>120,000 hours
Signal Connector
Removable Terminal Block
Power Requirements
11-24 VAC/DC @150mA
Physical Size (mm)
5.0" x 3.0" x 1.0";
(127mm x 76mm x 25.4mm)