Bio-Tek Microplate Reader ELx808

Description

We are selling a used Bio-Tek ELx808 Microplate Reader.  The unit was taken in good condition from a working laboratory environment.  The unit has 6 filters installed that include 405, 450, 490, 550, 630 and 750 nm, as well as another filter, 340 nm, that can be installed.  We have also included the original owner's manual and a calibration plate (Part Number 7260522).  The unit only comes with what is shown in the photographs.  Please note that separate Bio-Tek software will be needed for full functionality, and this is reflected in the low listing price.  Below is a description from the manufacturer:
BioTek ELX808IU Microplate Visible/Absorbance Reader
The ELx808 Absorbance Microplate Reader provides the flexibility to manipulate and analyze your data. This multi-channel reader continues BioTek's tradition of offering the tightest specifications of any microplate reader - precise, accurate and repeatable. The ELx808 on-board diagnostic self-test and calibration test plate make it easy to confirm and document reader performance. All calculations are performed automatically. Combined with our history of quality hardware engineering, the ELx808 sets the standard for microplate readers.
General
Detection modes:
Absorbance
Read methods:
End point, kinetic, linear scanning
Microplate types:
96-well plates
Temperature control:
4-Zone incubation to 50 °C
+0.2 °C at 37 °C
Shaking:
Linear
Absorbance
Light source:
Tungsten halogen
Detector:
photodiode
Wavelength selection:
filters
Wavelength range:
380 to 900 nm
340 to 900 nm (ELx808IU)
Dynamic range:
0 to 4.0 OD
Resolution:
001 OD
Pathlength correction:
no
Filter wheel capacity:
6 positions
OD accuracy:
< 1% at 2.5 OD
< 2% at 3.5 OD
OD linearity:
<1% at 2.5 OD
OD repeatability:
< 0.5% at 2.5 OD
< 1.5% at 3.5 OD
Reading speed (kinetic):
96 wells: 8 seconds
Physical Characteristics
Power:
100 - 240 Volts AC. 50/60 Hz
Dimensions: 15.5
"W x 16"D x 8.75"H
Weight:
35 lbs (15.9 kg)